Two Things Everyone Knows About Air Conditioning Companies That You Do Not
Air conditioning units can break-down for a number of reasons. Usually the resident does not immediately notice until the temperature outside rises. The interior temperature slowly rises which is then that most of the people recognize the tell tale signs of a broken air conditioner. The unit may run but only blow warm air.
Many times, in the event the unit is running but only blowing warm air, the problem can be rectified by cleaning the unit. In case you are comfortable with basic home repair you can do it yourself! Otherwise, a business that handles Phoenix air conditioning service can come out and do the job for you. It isn't too difficult and here's how you do it!
First look for a disconnect panel near the air conditioner. It looks like a giant circuit breaker. Throw the switch and also the unit should power down. For anyone who is not sure, you may shut off the main breaker to the whole house. A good way to test this is to run the fan first and make certain it turns off when you throw the switch.
Clear leaves and debris from around the unit and remove the protective grill that covers the condenser fins. You may always call a Phoenix air conditioning contractor to take over but lots of individuals see that they may do the work themselves. Brush off the fins with a sturdy brush. Vacuum them out to get rid of all of the accumulated dirt.
If possible, unscrew and remove the grill covering the top of the unit. If a fan is attached, ensure you do not disconnect any of the wires. Fundamentally, from in the unit, hose down the fins. Be mindful not to get any of the wires or connections wet!
When you're done, reattach all the grills and wait for everything to dry. If the temperature is low, you could need to wait longer. Activate the circuit again. Go inside the house and set the thermostat at a low temperature so the unit will turn on. Once on, look into the unit for normal operation. Should the unit does not turn on, make certain your thermostat is set on COOL and that you set the temperature low enough.
In the event the unit will not power on, you should call a Phoenix Heating and Air company to have the system professionally examined. Quite a few things may cause an air conditioning maintenance conditioner to not resume normal operation after a cleaning. Rather than troubleshoot on your own, your safest bet is to contact a service firm.
