The Must Have Reference List For Air Conditioning Services

Air conditioning units can break-down for a number of reasons. Usually the resident does not immediately notice until the temperature outside rises. The interior temperature slowly rises which is then that most people recognize the tell tale signs of a broken air conditioner. The unit may run but only blow warm air.

Often times, in the event the unit is running but only blowing warm air, the problem can be rectified by cleaning the unit. If you're at ease with basic home repair you can do it yourself! Otherwise, a business that handles Phoenix air conditioning service can come out and do the job for you. It isn't too difficult and here is how you do it!

First look for a disconnect panel near the air conditioner. It looks like a giant circuit breaker. Throw the switch and the unit should power down. If you are not sure, you can shut off the main breaker to the whole house. An excellent way to test this is to run the fan first and make sure it turns off whenever you throw the switch.

Clear leaves and debris from around the unit and remove the protective grill that covers the condenser fins. You may always call a Phoenix air cooling contractor to take over but many individuals find that also they can do the work themselves. Brush off the fins with a sturdy brush. Vacuum them out to get rid of all of the accumulated dirt.

If possible, unscrew and remove the grill covering the very best of the unit. If a fan is attached, make certain you don't disconnect any of the wires. Essentially, from inside the unit, hose down the fins. Be mindful not to get any of the wires or connections wet!

When you're done, reattach all the grills and wait for everything to dry. If the temperature is low, you may need to wait longer. Activate the circuit again. Go within the house and set the thermostat at a low temperature so the unit will turn on. Once on, check the unit for normal operation. In the event the unit isn't going to turn on, ensure your thermostat is set on cool training and that you set the temperature low enough.

Within the event the unit will not power on, you should call a Phoenix Heating and Air company to possess the system professionally examined. Quite a few things can cause an air conditioner to not resume normal operation after a cleaning. Rather than troubleshoot on your own, your safest bet is to contact a service firm.