5 Essential Facts Regarding Professional Air Conditioning Services

AC units can break down for many different reasons. Usually the resident does not immediately notice until the temperature outside rises. The interior temperature slowly rises and it is then that most people recognize the tell tale signs of a broken air conditioner. The unit may run but only blow warm air.

Many times, if the unit is running but only blowing warm air, the problem can be rectified by cleaning the unit. In case you are comfortable with basic home repair you may do it yourself! Otherwise, a business that handles Phoenix cooling service can come out and do the job for you. It is not too difficult and here's the way you do it!

First look for a disconnect panel near the air conditioner. It looks like a giant circuit breaker. Throw the switch and the unit should power down. For anybody who is not sure, you may shut off the main breaker to the entire house. A great air conditioning services way to test this is to run the fan first and make certain it turns off whenever you throw the switch.

Clear leaves and debris from around the unit and remove the protective grill that covers the condenser fins. You can always call a Phoenix air conditioning contractor to take over but many individuals discover that they may do the work themselves. Brush off the fins with a sturdy brush. Vacuum them out to remove all of the accumulated dirt.

If possible, unscrew and remove the grill covering the top of the unit. If a fan is attached, make sure you do not disconnect any of the wires. Fundamentally, from within the unit, hose down the fins. Be mindful not to get any of the wires or connections wet!

When you're done, reattach all of the grills and wait for everything to dry. Should the temperature is low, you could need to wait longer. Activate the circuit again. Go inside the house and set the thermostat at a low temperature so the unit will turn on. Once on, look into the unit for normal operation. If the unit won't turn on, ensure your thermostat is set on COOL and that you set the temperature low enough.

In the event the unit will not power on, you should call a Phoenix Heating and Air company to possess the system professionally examined. Quite a few things can cause an air conditioner to not resume normal operation after a cleaning. Rather than troubleshoot on your own, your safest bet is to contact a service firm.