Air Conditioning Services Tips

Air conditioning units can break-down for a number of reasons. Usually the resident doesn't immediately notice until the temperature outside rises. The interior temperature slowly rises which is then that many people recognize the tell tale signs of a broken air conditioner. The unit may run but only blow warm air.

Often times, in the event the unit is running but only blowing warm air, the problem may be rectified by cleaning the unit. In the event you are confident with basic home repair you can do it yourself! Otherwise, a company that handles Phoenix air cooling service can come out and do the job for you. It is not too difficult and here is how you do it!

First look for a disconnect panel near the air conditioner. It looks like a giant circuit breaker. Throw the switch and the unit should power down. If you're not sure, you can shut off the main breaker to the whole house. A great way to test this is to run the fan first and ensure it turns off whenever you throw the switch.

Clear leaves and debris from around the unit and remove the protective grill that covers the condenser fins. You may always call a Phoenix air conditioning contractor to take over but lots of people see that also they can do the work themselves. Brush off the fins with a sturdy brush. Vacuum them out to remove all the accumulated dirt.

If possible, unscrew and remove the grill covering the top of the unit. If a fan is attached, make certain you do not disconnect any of the wires. Simply, from within the unit, hose down the fins. Be mindful not to get any of the wires or connections wet!

When you are done, reattach all the grills and wait for everything to dry. Should the temperature is low, you may need to wait longer. Activate the circuit again. Go in the house and set the thermostat at a low temperature so the unit will turn on. Once on, look into the unit for normal operation. Should click through the next internet site unit will not turn on, ensure your thermostat is set on COOL and that you set the temperature low enough.

Within the event the unit will not power on, you should call a Phoenix Heating and Air company to have the system professionally examined. Quite a few things may cause an air conditioner to not resume normal operation after a cleaning. Rather than troubleshoot on your own, your safest bet is to contact a service firm.