Highway And Roadway Marking Company
When contemplating which material to use for the marking of highway asphalt or concrete, one should pay attention to the various options that will be available for purchase, and weigh the advantages and drawbacks of each. For the longest time, pavement paint was considered the marking device of choice, due to its relative longevity versus what were then flimsy tape alternatives, which were effortlessly stripped or warped by passing traffic. Paint suffers from such significant disadvantages as having to block off the newly painted area for a period of time while waiting for the paint coats to dry, as well as the hassle of having to paint several coatings to form lines that are sufficiently reflective. Eager to give a cost-effective alternate choice, manufacturers of pavement tape happen to be quick to design and offer series of pavement marking tapes that outperform paint without much added cost to the consumer. The resulting products function just also on the road for permanent lane marking tasks since they do in the delineation of temporary construction zones for asphalt overlay and repair work. To attain this degree of flexibility and utility, these particular grades of marking tape must conform to certain minimum standards.
Each such tape product is typically comprised of several layers - a reflective top layer in the standard white or yellow colors, a middle backing layer that provides reinforcement, as well as a precoated pressure-sensitive adhesive bottom layer to permanently adhere the tape to the pavement. The top layer is pigmented with a color that catches the light quite capably, and usually enhanced with large glass beads to further increase the reflectivity of the tape. Certain variations of standard-grade highway pavement marking tape make use of a metal middle layer, usually aluminium, supplying a material that is both resistant to wear and flexible sufficient to conform to different pavement surfaces and directions. The bottom layer adhesive should be of sufficient strength to ensure that the tape stays put without requiring a liner for her explanation protection from blocking, pre-adhesion or contamination.
To keep the price down for a product that seeks to achieve so many things, the common thickness of the tape material will be low, but not less than 12 mils, as any lower measurement would compromise the advantages provided the component layers of the tape. Even at this level, on the contrary, the marking tape, when applied as the producer has instructed, is both weather resistant and durable against wear, and also will not fade, lift, shrink or otherwise deteriorate through the term of its useful life.
Highway pavement marking tape will typically packaged in standard commercial containers that can be built to protect the product from damage while it is being shipped, and when it's stored. Since storing conditions can vary greatly, the material should be comfortable in storage for up to one year, in temperatures of up to a balmy 100 degrees F. When you open that container, you should check that the tape is of decent appearance, free from cracks and edges, and no more than 3 splices for every 50 yards of tape to insure integrity.
